Small Business Support Community

Copy SG300 software img between 2 same switches

I have 2 SG300 10P switches in my network and have different software S1: 1.1.2.0 and S2: 1.4.8.6.I look @Cisco Support to Upgrade S1. But because the SG300 is ELO support I cannot download the Software any more and want to use the img on S2.However ...

Need RV260 Legacy Firmware (1.0.00.15 or 1.0.00.17) to Restore SSH Acc

Hello Cisco team,I have a Cisco RV260 router currently running firmware 1.0.01.10, and this version no longer includes the SSH Local Management feature.For operational and administrative needs, I require access to a legacy firmware version that still...

CSCwh70841 - switch reboots with FATAL ERROR Reporting Task: TCPP.

I'm currently seeing this on a CBS35-24XT - Software Version 3.5.3.2 about once a month. Any fixes?

FCW2232L0V3

Firmware 1.1.0.16 wvc210 Camera

I do not have a service account with Cisco, but I need the firmware for this camera. Is there any way to get that version of the firmware?

CBW 150 AX keeps blinking green even after factory reset

I cannot seem to reset my CBW 150AXHave tried factory reset 2 times.Keeps blinking green.The other APs on my network are ok

SG200-50 firmware not available for download

Hi, I need archived firmware sx200_fw-1_3_7_18.ros for SG200-50 (EoL). Serial is out of support but I only need the intermediate file to upgrade. Portal rejects the case.

Off hook issue

Hi,I have a PAP2T-NA connected to freepbz. I can make outgoing calls without issues, but when someone calls me, they hear a busy signal. In the system info, it shows "Hook State: On," and I believe this is causing the problem.

Resolved! SG200-50P 50-Port Gigabit PoE Smart Switch firmware update

I want to update the firmware on a Cisco SG200 50 Port PoE smart switch. When I go to the Cisco product page:https://www.cisco.com/c/en/us/support/switches/sg200-50p-50-port-gigabit-poe-smart-switch/model.html#~tab-downloadsI see the latest update as...

How to find SF200-24P firmware download?

Hi, I'm bastante and i would like to know, how to download SF200-24P firmware... He is blacklisted ???

Adding second 150AX to network not working

I have a small office network with an existing CBW150AX-E-EU AP. I'm trying to add another CBW150AX-B-NA AP to the same network. It is a single VLAN network with a switch and an ISP router with DHCP service.The new AP powers up and boots to a conditi...

ios downloded

I wanted downloded the Catalyst Express 500 firmware

Create a VPN Client to site with IKEV2 and windows client

Hello everyone,I have a Cisco RV345 router and I successfully configured a L2TP/IPSec VPN using IKEv1 with the built-in Windows VPN client.https://www.youtube.com/watch?v=aZwCrtoTYx0Now I am trying to configure a client-to-site VPN using IKEv2, still...

SPA50xG IP Phone Recovery Utility (SoS mode recovery)

In the event that a SPA50xG IP phone experiences an interruption of power during a firmware upgrade, the phone's firmware images could be rendered unusable. If this occurs, the phone will display a message "SOS phone in recovery mode".The phone will ...

Catalyst 1300 Setup

Hi, I'm interested in getting a Catalyst 1300 switch. Have a few questions:1.) Is the console port on these switches truly OOB? The fact that you can set them up via any of the other ports via web interface makes me unsure about this.2.) If I set up ...