02-11-2021
08:35 AM
- last edited on
02-18-2021
01:08 PM
by
Hilda Arteaga
To participate in this event, please use the button below to ask your questions
Ask questions from Thursday 11th to Friday 19th of February, 2021
For more information, visit the Cisco Support & Downloads page.
Solved! Go to Solution.
02-16-2021 10:43 PM
Hi
Currently, there is no 11v data present on sh tech wireless/sh run. In general, we avoid client individual values in those files, for scalability and privacy reason
I will check if we can incorporate summary data for analysis. thanks for your suggestion
02-16-2021
03:55 PM
- last edited on
03-09-2022
10:55 PM
by
smallbusiness
Hello @Javier Contreras and @Shankar Ramanathan
Thank you for sharing your time and knowledge, we have learned tons about the Wireless TAC tools
Please help us to answer some of the remaining questions of the live session:
02-16-2021 10:43 PM
Hi
Currently, there is no 11v data present on sh tech wireless/sh run. In general, we avoid client individual values in those files, for scalability and privacy reason
I will check if we can incorporate summary data for analysis. thanks for your suggestion
02-16-2021 03:56 PM
02-16-2021 11:02 PM
Hi
RF Index is an older version of the RF Health. it is a way to highlight APs that have metrics which are a lot worse than other APs around. There is no upper limit, and basically you would use to see if one or more APs have some very high value, when compared to their neighbors, as it would indicate something is wrong
In general, it is better to use the RF Health indicator, as it would highlight "why" something is wrong. RF index is kept for historical reasons
02-16-2021 05:41 PM
02-16-2021 06:01 PM
02-18-2021 11:53 AM
02-18-2021 12:13 PM
For Catalyst 9800 config migration – Please download the CFG file directly from the tool post-conversion and upload the translated .cfg file to “9800 bootflash:”. Then execute: “copy bootflash: running-config>” on your WLC 9800 for config migration
02-18-2021 11:54 AM
02-18-2021 12:13 PM
For AireOS WLC's please do not confuse "show run-config startup-commands" output with "show run-config". Only"show run-config startup-commands" or TFTP config backup is a supported input format for AireOS migration.
02-18-2021 11:54 AM
02-18-2021 12:14 PM
Upload the "show tech wireless" output to https://cway.cisco.com/wireless-config-analyzer/ and RUN the analysis
02-18-2021 12:34 PM
Hi @Javier Contreras and @Shankar Ramanathan we just received this question via email (please help to over)
02-18-2021 12:47 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide