Hello all,we're trying to reinstall an APIC G5 server with 6.1 version after an attempt of install 6.0 failed with error.'[' -d /sys/block/vdb ']'+ '[' -z '' ']'+ '[' -z sda ']'+ ROOTDRIVE=sda+ echo 'Chose root drive: ROOTDRIVE=sda'Chose root drive:...
Forum Posts
HiI have a quick ACI question – in ACI lab we have 2 apics in version 6.1 and trying to setup a cluster. The third (and standby) apic we will have later.What is correct option to setup cluster with 2 apics at the beginning ?In APIC Cluster Bringup in...
Hello,I configured an ACI Multi-Site deployment with a Bridge Domain stretched between Fabric 1 and Fabric 2.From the control-plane perspective, I can see that the spine switches learn all remote IP/MAC entries via BGP EVPN and correctly install them...
Hi, I have a existing small ACI fabric, illustrated in the high-level diagram below and I would need some information/advice on a "weird" setup requirement...RT1 has already established OSPF peering with ACI and Jumpbox (using RT1 as default gateway)...
I am trying to deploy Cisco ACI 5.2-4d Simulator version on my ESXI Server. The Deployment went fine and I am able to Launch APIC Gui. The Switch. The Leaf and the SPine gets reflelcted in Non-Pending Registration. I tried registering these Switches....
Resolved! APIC database
APIC cluster "Data Layer Partially Diverged" after RMA of APIC2Three-node cluster, APIC-M3, version 6.0(5h). APIC2 had a disk failure, we got an RMA.Followed the procedure: decommissioned APIC2 from APIC1, physically swapped, ran the setup script wit...
Hello community,I would like to get your assessment regarding a QoS issue between Cisco ACI and Cisco UCS.There is already a long-standing TAC case (700529798) open on this topic, but it has not yet been fully resolved. Regardless of the TAC's findin...
Hi I am trying to add pod in devnet sandbox lab getting bekow error.Can any one help on this or any clarify is this issue on sandbox only?Validation failed: Infra vlan 4 is used by Domain uni/l3dom-HRN_IPNL3Out_RoutedDomain and in AEP uni/infra/atten...
Resolved! Virtual login to APIC Sandbox
Hey, I am new to all this but coping not bad I think. I am trying to do some work with ACI programming on the Cisco Virtual Sandbox, the thing is I keep returning authentication error. I have also tried to get in through Postman and the same happens ...
Hi everyone, we are currently running Cisco ACI version 6.0(8e) and are looking into standardizing and improving the interface descriptions on all Leaf → Spine uplinks. Under Fabric → Access Policies → Interfaces → Interface Configuration, the GUI de...
This post provides the ACI Health Check Collector Package and User Guide for Windows.The collector package is required to collect the necessary data from your Cisco ACI fabric for performing an ACI Health Check on the Windows platform.WindowsThe foll...
Resolved! About MIC certificate expiration
Hello.What happens when the mic certificates on switches and APICs expires?Should we do something proactively or simply leave it as is?# pki.FabricNodeSSLCertificatern : ifmcertnode-***serialNumber : *******signatureAlgorithm : sha1WithRSAEncryptions...
Good day,I have a current environnment with ACI deployed on one datacenter and connected to the vcenter managing all ESX worldwide.the ACI is deployed in one datacenter (DC-A). I need to migrate from this ACI to something else. Scenario1 would be a n...
Hi All,We currently have 5 L3Outs in our ACI deployment using routed subinterfaces. All L3Outs reference a single L3 domain which then references a VLAN pool that contains the VLAN IDs used by the subinterfaces.According the ACI L3Out whitepaper (htt...
Hello everyone,I am experiencing an issue after upgrading a Cisco ACI fabric to APIC 6.1(5e) (aci-apic-dk9.6.1.5e.iso).I have a backup automation that creates a temporary remote path before exporting the configuration and removes it once the backup h...
