cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3345
Views
5
Helpful
4
Replies
Beginner

GLC-SX-MM to GLC-SX-MM-RGD

Hi guys,

We are planning to use 1552E APs with rugged SFP GLC-SX-MM-RGD. The switches are Cisco 3750X series.

1. It seems Cisco 3750X series do not support the rugged SFP GLC-SX-MM-RGD. Can anyone confirm this or has used the rugged sfp with 3750X?

2. If the 3750X doesn't support rugged SFP, we are planning to use GXC-SX-MM on the switch and the rugged on the AP side. Will this work?

Thanks in advance.


Regards,

Delgee

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Rising star

GLC-SX-MM to GLC-SX-MM-RGD

Using a GXC-SX-MM at one end and a GLC-SX-MM-RGD at the other will work.  They are both 1000Base-SX compliant transceivers. 

The key is to confirm compatibilty between the transceiver module and the hardware it is being install in.

View solution in original post

4 REPLIES 4
Highlighted
Hall of Fame Community Legend

GLC-SX-MM to GLC-SX-MM-RGD

1. It seems Cisco 3750X series do not support the rugged SFP GLC-SX-MM-RGD. Can anyone confirm this or has used the rugged sfp with 3750X?

Not supported.

2. If the 3750X doesn't support rugged SFP, we are planning to use GXC-SX-MM on the switch and the rugged on the AP side. Will this work?

Might work.

Highlighted
Beginner

GLC-SX-MM to GLC-SX-MM-RGD

Thanks for the reply.

Highlighted
Rising star

GLC-SX-MM to GLC-SX-MM-RGD

Using a GXC-SX-MM at one end and a GLC-SX-MM-RGD at the other will work.  They are both 1000Base-SX compliant transceivers. 

The key is to confirm compatibilty between the transceiver module and the hardware it is being install in.

View solution in original post

Highlighted
Beginner

GLC-SX-MM to GLC-SX-MM-RGD

Thanks for the confirmation. Much appreciated.


Regards,
Delgee

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here