Diagnostic Monitoring is not implemented

[anasubra_2]

Hi All,

We are trying to find the reason and solution for the below problem. We are tring to perform the below command and get the below message.

router#show interfaces gigabitEthernet 5/1 transceiver

Diagnostic Monitoring is not implemented.

The module on which the above gig interface is WS-X6408A-GBIC and the IOS version running on this router is s72033-advipservicesk9_wan-mz.122-18.SXF11.bin. The sup on this router is SUP-720-3BXL.

Any help to understand why it is giving that message and the solution to overcome the same would be really appreciated.

Regards

Anantha Subramanian Natarajan

WS-X6408A-GBIC --Module 5

s72033-advipservicesk9_wan-mz.122-18.SXF11.bin

SUP-720-3BXL

[Tom Randstrom]

Which GBIC optical modules are you installing into the WS-X6408A-GBIC? The following document outlines the DOM support by hdwe and software.

Cisco Digital Optical Monitoring Compatibility Matrix

<http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_8031.html>

[anasubra_2]

Hi baileyshbr,

Thank you very much and I have to check the GBIC's .

Regards

Anantha Subramanian Natarajan

[reamea chey]

s-01-pnh-asr#sh interfaces gigabitEthernet 0/25 transceiver detail

Diagnostic Monitoring is not implemented.

Can't see anything.