1760V Fax Relay / Pass-through Support?

[jbarbee]

http://www.cisco.com/warp/public/788/AVVID/avvid_fax_support.html

It says that this gateway doesn't support fax relay or pass-through faxing.

I was looking at deploying 1760V's with PRI's to offices, and ATA's on the fax machine.

Ok. If the matrix says it does not support fax pass-through... then will the 1760V not support "pass-through" to the ATA on the fax machine?

-Jason

[dgoodwin]

Hi Jason,

Using 12.2(11)YU software on the 1760, Fax passthrough (required when using ATA18x) is supported. You'll have to use H.323 to talk to the 1760, unless the CallManager is running 3.3.