Hi Mike,
Per you problem description seems to be that you dont have configured a route pattern for
7 digit local calls:
[2-9]XXXXXX
Check this good link to configure route patterns:
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_admini
stration_guide_chapter09186a00800c4a1d.html
There are two common problems that occur when you use the @ placeholder:
When a user dials a 7-digit number, the user has to wait for the inter-digit timeout to
expire or has to press the # key.
Go to the Route Filter screen and add a filter with LOCAL-AREA-CODE DOES-NOT-EXIST AND END-OF-DIALING DOES-NOT-EXIST; apply it to your Route Pattern that contains the @
placeholder.
Users cannot dial a number where the office code is X11 (1 + Area Code + Office Code +
Extension), for example the 11 in 1 800 611 4215 or 1 919 311 5432.
The workaround is to add another Route Pattern such as 9.1 [2-9]XX [2-9]11 XXXX to the same gateway or route list as the 9.@ pattern. Do not forget to add the same digit discard instructions, if any.
This info is explained clearly here:
http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_tech_
note09186a00800949f0.shtml
Please let me know if this is what you are looking for.
Other way to check which RP we are matching is the CCM trace.
