Alternate Gateways

[scottiptel]

I have CCM 4.0. I have sites where I need to configure two gateways one is for Local Calls and another for LD calls. All the local and incoming DID calls goes through the Local PRI, and the LD calls goes through the LD PRI if everything is normal. For LD if the LD PRI goes down I have to set up Local PRI as a second choice for LD calls. I can manage this with the RL and RG. But here is the real problem, for LD the service provider needs only 10 digits and SDN(Software Defined Network) option set for LD calls, whereas the Local PRI doesnt like this option set. Eventually my second choice is not working if the LD PRI is down. And there is only one place where I can set the SDN is Route Patterns.Please let me know if there is any solution or thoughts for this.

Router Pattern 9.@

RL LD----------1st choice LD PRI

2nd choice Local PRI

Discard Digits Predot 11 to 10

SDN set on this Router Pattern

[adignan]

I know you are probably trying to stick w/ MGCP but have you thought of going back to H.323 to give you more control?

[scottiptel]

I did think about H.323 but there is only one place where I can set the SDN option for one Route List with two gateways. Is there any way to manage this with H.323....Can I set the SDN on the router for PRI