Hello,
I want use a ip telephony provider. I must configure my AS5350 to join some international number with h323 gateway provider (without Gatekeeper).
But All my call use my E1 (isdn, dial-peer voice 2 pots).
What is wrong in my configuration?
Version 12.3(11)T2
dial-peer voice 1 voip
permission orig
tone ringback alert-no-PI
numbering-type international
destination-pattern T
voice-class codec 1
session target ipv4:XX.XX.XX.XX
dtmf-relay h245-alphanumeric
!
dial-peer voice 2 pots
tone ringback alert-no-PI
destination-pattern T
translate-outgoing called 2
direct-inward-dial
port 3/0:D
Thanks for your help
Regards
fabien
