Other Collaboration Subjects

We are having an issue that I've been able to narrow down to Attendant Console Client users, version 1.4(1).When they are on the phone and another call comes in, it will actually disconnect the current call and pick-up the new one. It happens when t...

Hello, I have the following problem between a cisco voice gateway (H323) and a PRI from Albacom:At random moments, one needs to try different times to connect to certain numbers.After troubleshooting, we noticed that the PSTN sends a disconnect messa...

Hi to all, I have the following problem. I want to configure Netmeeting for a lab but there is a proxy involved between the router and the switch, that gives dynamic IPs to the computers to the lab... So each time the pcs have different IPs from a ra...

Hi, due to company policy, we need to move ou=Cisco from domain root deeper in the tree. Is it possible? If so, what is the procedure (we need to preserve all user settings, PAB, EM profiles, ...)?Thank you.

ephone 1(ext3519) calls on ephone 2(ext3525), upon successful connection ephone 1 puts ephone 2 on Hold.After it: debug ephone error mac-address 0012.7f0f.3f8d, where mac-address belongs to ephone 1gives the following: ...7w0d: SkinnyGetCallState DN ...

Hi,i have configured a short script.Call will accept than you here a prompt. Then there are happend a Call-Redirect to a extension in the CME. When the call is successfull it work fine. Then i have configured under the value busy a prompt. But i didn...

Callmanager express is running 12.3(14)T5, all ip phone have 4 digits extension, e.g 2210,2211.One IDAP(T1) isdn is connected to PSTN network, debug isdn q931 show the calling party no to PSTN is 2210, but PSTN need the whole level ( 8 digits)e.g. 28...

Hi,I Have Cisco 2821 router with PVDM2-64 module.I have registered the PVDM2-64 module with CCM 4.1(3) for conferencing & transcoding.I am not able to increase the transcoding "maximum sessions" on the dspfarm profile.I have tried reducing the max co...

Would like to confirm the power requirement as below?Power requirement of V224 is AC Input Voltage: 100 to 240 VAC and AC Input Current (max): 1 Amp Power requirement of VG248 is AC Input Voltage: 100 to 240 VAC and AC Input Current (max): 4 Amp Than...

For a Call Manager cluster version 3.3.4.I have a perl AXL script to update several thousand phones lines from 5 to 10 digits in length. The script works fine in changing the number. But... we also need the script to blank out the existing 'Externa...

Hi,I am having some problems with 7970 phones. - Phones keep hanging when logging in and out of extension mobility.- Some phones just can't boot up, keeps on rebooting- Transfer softkey disappears during a call Anyone encounters these before?Thanks.E...

Hello all,I see ip address at ccm, but not register at router gateway.Pls see attached file and support for problem in thisthanks

One of my customer applied security patches to both publisher and subscriber ccm servers from Microsoft directly.After he reload publisher, he got tons of error messages in application log. The subscriber hasn't been reloaded yet. So far phone system...

can I upgrade unity from version 4.0(4) to version 4.0(5) at the same time as upgrading callmanager from version 3 - 4.1Thanks

Currently I have a Cisco Call Manager 3.3(3)sr4 using 8 vg248 fxs ports connected to a castelle fax press 5000 server. On those 8 ports I have our main fax number coming in on line one and forwarding the call to the next number if busy or no answer. ...