ATA drop the call after 120 sec.

[aattravi]

i have CCM3.2.2a and more ATA.

when the phone connected to ATA started a call, after 120 sec the call is disconnected!

ideas?

[Chester Rieman]

it sounds like you are not getting answer supervision:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800e2560.shtml

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00801123bb.shtml

[aattravi]

the problem is only on ATA, and the ipphone (7940-60) work fine.

the voice gateway is c3640 with 6 BRI (basic-net3) on VIC-2BRI-NT/TE card.

thanks.

[h.botha]

Hi , I had the same problem . Have a look at your StationKeepaliveInterval , this should be set to 30 seconds .

Regards

[aattravi]

thanks!

I suspected this timeout!

now i have select the default timeout and i don't have the problem.

bye