Callmanager 4.0(2) upgrade

[tarun.pahuja]

Upgrade to Callmanager 4.0(2). Is it stable? what is the most recent stable Callmanager release.

Can i back up 3.3(4) pub database using BARS. and import it on to another server which has 4.0(2) installed? any documentation would be helpful.

[martin.lowes]

Hi,

You will not be able to take a 3.3(4) database and import it into a version 4 Call Manager.

I have placed some links which should help.

It is important to check the compatibility matrix for the minimum revision levels for all equipment in the voice network. I have added the link also.

Backup and Restore Installation procedure

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_installation_guide_chapter09186a00801ebeac.html

Compatibility Matrix

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/ccmcomp.htm

Upgrade Procedure

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_0/install/upgrade/upg402/index.htm

Upgrade Assistant Utility

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_0/install/upgrade/up402tl.htm

Martin.

[anilbatra007]

Hi Tarun

Will appreciate if you could share your experinece of CCM 3.3(4) to CCM 4.0(2). I am also planning for the same.

Thanks,

AB