choosing the "right" BRI

[FlorianCokl]

Hello everybody,

this is the situation:

Lets say we have 2 BRI interfaces (BRI0 and BRI1) and the service-provider has configered them for different ranges of telephone-numbers.

Lets say we have 10 Phones. I want the first 5 phones to use BRI0 exlusively and the latter shell use BRI1 exclusively. Both BRI interfaces are in the same router. Spreading interfaces on two routers is therefore not an option.

Input appreciated - almost any input

[paolo bevilacqua · Accepted solution]

This is often asked, had you searched before

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml

You can also use COR instead of steering digits.

[FlorianCokl]

Hello Paolo,

ok - objection accepted - yet, why wheren't we be able to find this exact document?! We found a lot of c...

How about the COR?! Do you have link, too?!

[paolo bevilacqua]

Likely the search engine is not the best at returning what one needs.

You can use the forum search for COR configurations, there are many threads.

Thank you for the nice rating and good luck!