04-13-2016 02:02 AM - edited 03-13-2019 09:25 PM
Hai dear,
i have cisco paging application installed one site (A) and working normally.
but when i add extension number from site B in a grup cisco paging (informacast singlewire)to make broadcast in site B, its not working, no voice out in local site B.
so, i make a grup the contents are extension from site A and B together to check.
extension A initiate Paging, in site B no voice out just a notification lamp. in site A normal.
Extension B initiate Paging, in site B no voice out just notification, but in site A normal.
please help me to solve this problem.
Thanks
Solved! Go to Solution.
04-13-2016 07:45 AM
Paging relies in multicast, are you sure your config allows multicast to reach site B??
04-13-2016 07:45 AM
Paging relies in multicast, are you sure your config allows multicast to reach site B??
04-13-2016 08:44 PM
yes i m sure
mulitcast has been enable in all interface
05-08-2016 05:20 PM
This will show you what to check:
https://supportforums.cisco.com/video/12940111/no-audio-played-when-paging-informacast
Please let me know if you have any questions.
---------------------------
Please rate helpful content (i.e. videos, documents, comments). Also, please select the correct answer(s) if any comment(s) answer your question otherwise the questions remains on the support forums as unanswered
---------------------------
06-21-2016 08:26 PM
Hi all,
thanks for the help, this problem was solved,
there is one switch as L3.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide