CME4.0

[gclark]

Heres my question we have a did block x5800 to x5850 customer would like clid sent out for each ext eg.x5801 out going call would show 4163045801 on answering phone right now terminating end just gets 5801 have looked at translations and i only see national and international adding digits.

We have sent main number out before via translations bit these numers will be unique to each dn.Any ideas

[gpulos]

you can use 'voice translation rules' to create the CLID to be sent with the call. these can match digit patterns and replace them with other digit patterns.

see this link for voice translation rule configuration:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml