configure ws-6608-e1 as dsp resources

[erodrig]

Hi i have callmanager version 3.3 and i want to configure a ws-6608-E1 as dsp resources but don`t register in callmanager, do i need a version of catos or callmanager in special for this configuration?

actually is configured in callmanager a software dsp resources, when i try to configure the ws-6608-e1 i need delete the software dsp resources?

i mean, can be both configured in callmanager at the same time?

thanks

[Daniel Baum]

You need CatOS 6.3(8) for CCM 3.3(3) and CatOS 7.6(1) for CCM3.3(4).

See:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/ccmcomp.htm

You do not need to delete the software DSP resource, however, you do need to have the 6608 DSP resource in the MRGL that will be used for your Device Pool.

Dan