configuring 3640 with FXS port with Cisco ATA 186

[hari_bhr]

Hi all

i have in office Cisco 3640 with FXS ports and other Office also same

how do i configure both the boxes to talk with FXS to FXS and need a digital number to dial

second is other place for economy , how do i use cisco ATA 186 to call Cisco 3640 FXS, and visevirsa

thanks for any solution

hari

[mimckee]

For the 2 3640s you will need to configure voip and pots dial-peers on both that point to each other. You will be using h.323 to signal between the two.

This will be a good place to start.

http://www.cisco.com/warp/public/788/voip/voip.shtml

With the ATA you will also want to use h.323 for signalling. I have not done h.323 with the ATA before so I can't help you to much.

Thank you,

-Mckee

[hari_bhr]

Hi

iam already done the FXS to FXS

iam looking from ATA also

thanks

hari

[ccastano]

Hari, take a look at this document:

http://www.cisco.com/warp/public/788/voip/ata_gateway.html

Also, here are some more related ATA doc resources:

http://www.cisco.com/warp/public/788/voip/voip.shtml

Any feedback on how the above docs helped or did not helped you with your issue will be appreciated.

Carlos Castano