08-17-2012 01:12 PM - edited 03-15-2019 05:22 AM
Just migrated over to SIP environment,Howver I am seeing sporadic drops of inbound and outbound calls.
I was also testing and found that my outbound dial peers are not workling properly
Even though i specified my local,longdistance,International and Emergency Services dialpeer.
I have the translations and dial-peer configurations below
voice translation-rule 1
rule 1 /^9\(.*\)/ /\1/
!
voice translation-rule 2
rule 1 /\(.*\)/ /9\1/
!
!
voice translation-profile prefix9
translate called 2
!
voice translation-profile strip
translate called 1
!
dial-peer voice 10 pots
trunkgroup 81_Atlanta_Outbound_calls
description "Calls coming in from Avaya PBX"
translation-profile incoming prefix9
destination-pattern .T
incoming called-number .
no digit-strip
direct-inward-dial
!
dial-peer voice 181 voip
description "Outbound Local 10 digit Calls"
translation-profile outgoing strip
preference 1
destination-pattern 9[2-9]..[2-9]......
rtp payload-type nte 98
session protocol sipv2
session target ipv4:100.240.224.1
incoming called-number .
voice-class codec 1
dtmf-relay rtp-nte
no vad
!
dial-peer voice 182 voip
description "Outbound Long distance Calls"
translation-profile outgoing strip
preference 1
destination-pattern 91[2-9]..[2-9]......
rtp payload-type nte 98
session protocol sipv2
session target ipv4:100.240.224.1
voice-class codec 1
dtmf-relay rtp-nte
no vad
!
dial-peer voice 183 voip
description "Outbound International Calls"
translation-profile outgoing strip
preference 1
destination-pattern 9011T
rtp payload-type nte 98
session protocol sipv2
session target ipv4:100.240.224.1
voice-class codec 1
dtmf-relay rtp-nte
no vad
!
dial-peer voice 184 voip
description Service calls 411,911
translation-profile outgoing strip
preference 1
destination-pattern 9[49]11
rtp payload-type nte 98
session protocol sipv2
session target ipv4:100.240.224.1
voice-class codec 1
dtmf-relay rtp-nte
no vad
!
I need assistance in trobleshooting.maybe i'm missing something here.Thanks in advance for all your help.
08-17-2012 09:12 PM
What does the debug say about who ends the calls and reason code???
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide