cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
533
Views
0
Helpful
1
Replies

Dropping outbound and Inbound calls

jummy1283_2
Level 1
Level 1

                   Just migrated over to SIP environment,Howver I am seeing sporadic drops of inbound and outbound calls.

I was also testing and found that my outbound dial peers are not workling properly

Even though i specified my local,longdistance,International and  Emergency Services dialpeer.

I have the translations and dial-peer configurations  below


voice translation-rule 1
rule 1 /^9\(.*\)/ /\1/
!
voice translation-rule 2
rule 1 /\(.*\)/ /9\1/
!
!
voice translation-profile prefix9
translate called 2
!
voice translation-profile strip
translate called 1
!
dial-peer voice 10 pots
trunkgroup 81_Atlanta_Outbound_calls
description "Calls coming in from Avaya PBX"
translation-profile incoming prefix9
destination-pattern .T
incoming called-number .
no digit-strip
direct-inward-dial
!
dial-peer voice 181 voip
description "Outbound Local 10 digit Calls"
translation-profile outgoing strip
preference 1
destination-pattern 9[2-9]..[2-9]......
rtp payload-type nte 98
session protocol sipv2
session target ipv4:100.240.224.1
incoming called-number .
voice-class codec 1
dtmf-relay rtp-nte
no vad
!
dial-peer voice 182 voip
description "Outbound Long distance Calls"
translation-profile outgoing strip
preference 1
destination-pattern 91[2-9]..[2-9]......
rtp payload-type nte 98
session protocol sipv2
session target ipv4:100.240.224.1
voice-class codec 1
dtmf-relay rtp-nte
no vad
!
dial-peer voice 183 voip
description "Outbound International Calls"
translation-profile outgoing strip
preference 1
destination-pattern 9011T
rtp payload-type nte 98
session protocol sipv2
session target ipv4:100.240.224.1
voice-class codec 1
dtmf-relay rtp-nte
no vad
!
dial-peer voice 184 voip
description Service calls 411,911
translation-profile outgoing strip
preference 1
destination-pattern 9[49]11
rtp payload-type nte 98
session protocol sipv2
session target ipv4:100.240.224.1
voice-class codec 1
dtmf-relay rtp-nte
no vad
!

I need assistance in trobleshooting.maybe i'm missing something here.Thanks in advance for all your help.

1 Reply 1

Jaime Valencia
Cisco Employee
Cisco Employee

What does the debug say about who ends the calls and reason code???

Sent from Cisco Technical Support iPad App

HTH

java

if this helps, please rate
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: