07-03-2002 06:45 AM - edited 03-12-2019 07:38 PM
Hi,
If we try to call the emergency number 112 we don't get a connection.
I asume the 911 number in the States is the same config / problem, has anyone any experience with this ?
Thanks in advance for your help
07-04-2002 12:33 AM
Johan,
Make sure you use the correct calling search space and partition configuration. I presume you are using Callmanager 3.x ? Also note the 0. configuration.
Please post how you configured the rout-pattern in de callmanager.
Regards,
Simon
07-05-2002 03:26 AM
We've tried the route pattern 0.xxx, 0.11x, 0.112, also ont he gateway you can see the number 112 leaving, then it will be quite for ten seconds.
After the ten seconds you'll get a busy signal.
We've also a NANP file for the Dutch PSTN network, we've tested this with the route pattern: 0.@ also with this test we get the same results.
Hope this helps, please let me know.
Greeting,
Johan
Thanks in advance for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide