Hotline in ATA 186 SCCP .

[carlos.gonkalves]

Hi , how i can make a configuration of a hotline in ATA 186 SCCP.

I have a CCM, but the hotline works just in one direction not in both directions.

Thanks,

Gonçalves

[jaregalado]

Hi,

you can use the procedure outlined here:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080232b9f.shtml

Just be sure that the Translation Pattern CSS includes the partition on which the hotline number is located.

I tried it some weeks ago and it didn´t worked on my first try, then I realised that the document is incorrect, made the modification above and now it works fine.

Regards.