How to play locally stored file in loop?

[boris.majstorovic]

Hi

We have DMP-4400G without manager and want to play single file from local storage.

We did store file in local storage.

And we can play it on the screan with start stop function in Play Video Files Stored Locally.

Does it poslible to play that file in loop?

Thanks

[akalinnikov]

Hi, folks!

I have the same question. Thanks in advance.

[vipersl65]

Go to the web GUI of the dmp and enter the file info in the flash media URL

Sent from Cisco Technical Support iPhone App

[boris.majstorovic]

Hello,

Can you be a little more specific?
We have file on the local storage, and we can play it, but only once.
Because it is presentation with 6 min duration, it has to click on play every 6 minutes.
It is ridiculous.

Regards,

[fbergamo]

There are basically two ways to accomplish this. The first is fully supported by Cisco TAC, the second is not.

1. Use DMM Deployment packages and submit the task to play the presentation locally from the DMP.

http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/dmm/user/guide/dmp/cds.html#wp2188052

2. Create your own html page to have the content playing from the DMP flash (usb_1) or USB key (usb_2).

https://supportforums.cisco.com/docs/DOC-14752

https://supportforums.cisco.com/message/3194092

Regards,

Fabio Bergamo

Cisco TAC

[boris.majstorovic]

Hello

The Conclusion is:

Without DMM deployment it is not possible to play single file from local storage, that is supported by CISCO?

Thanks

Regards