03-30-2010 08:51 AM - edited 03-13-2019 06:55 PM
We are attempting to connect Cisco ICM to our Nortel Symposium/CCMS 6 server, BUT the two devices are separated by a firewall. I have been able to find documentation regarding the multicast configuration on the Nortel side, but nothing using unicast through a firewall.
Has anyone attempted this before, or does anyone know of documentation for port/firewall requirements between the two devices?
Thanks,
James
06-15-2010 07:32 AM
Hi James
Did you get any input on this..? Were you able to solve this issue...?
We came across a similar issue as well... Any thoughts will be helpful.
Thanks
Kabeer
06-15-2010 09:07 AM
Kabeer,
We were finally able to get this working--I only have access to the configuration on the Nortel side however. This is what I have open inbound on my firewall--I am not filtering outbound (Nortel-->ICM):
service-object tcp eq 3000
service-object tcp eq 1550
service-object tcp eq 4905
service-object tcp eq 30000
service-object tcp eq 10020
service-object tcp eq 135
service-object tcp eq 10000
service-object tcp eq 10023
service-object tcp eq 10024
service-object tcp eq 10025
service-object tcp range 1024 5999
service-object tcp eq 10013
06-15-2010 05:37 PM
Thanks James.... When i had put a wireshark... I am seeing an ICMP traffic from the PG to the Nortel everytime when I start the service... were you experiencing any similar traffic...?
Best Regards
Kabeer
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: