06-21-2005 05:38 AM - edited 03-13-2019 09:32 AM
Hi,
Can you please help me ? I am trying to setup an interconnextion betweenn an s0 interface of a pabx and a cisco routeur. However, I cannot established any communication and I am really stuck.
Here is some debug :
voipgw.gs.par#sh isdn stat
Global ISDN Switchtype = vn3
ISDN BRI1/0 interface
dsl 0, interface ISDN Switchtype = vn3
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
debug isdn :
Jun 21 13:37:01: ISDN BR1/0 EVENT: service_queue_from_physical_layer: Recvd L1 prim 1 state is 3
Jun 21 13:37:01: ISDN BR1/0 EVENT: isdn_sw_cstate: State = 4, Old State = 0
Jun 21 13:37:01: ISDN BR1/0 EVENT: service_queue_from_physical_layer: Recvd L1 prim 6 state is 1
Jun 21 13:37:01: ISDN BR1/0 Q931: RX <- SETUP pd = 8 callref = 0x3F
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x89, '735'
Plan:Private, Type:Unknown
Called Party Number i = 0x80, '720'
Plan:Unknown, Type:Unknown
Sending Complete
Jun 21 13:37:01: %ISDN-6-LAYER2UP: Layer 2 for Interface BR1/0, TEI 65 changed to up
Jun 21 13:37:01: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x8D calltype 2 HOST_INCOMING_CALL
Jun 21 13:37:01: %LINK-3-UPDOWN: Interface BRI1/0, changed state to up
Jun 21 13:37:01: ISDN BR1/0 Q931: TX -> CALL_PROC pd = 8 callref = 0xBF
Shift to Codeset 6
Codeset 6 IE 0x24 i = 0x80
Jun 21 13:37:01: //201/61CEA8958101/CCAPI/cc_api_call_disconnect_done: cause=21,retry=0,vcCauseCode=0
Jun 21 13:37:01: //200/61CEA8958101/CCAPI/ccGetCallActiveByCallID: cc_spi_call_get() returned -7. (setup_time=0x437EEAB, index=0x1)
Jun 21 13:37:01: //200/61CEA8958101/CCAPI/cc_api_call_disconnect_done: cause=21,retry=0,vcCauseCode=0
Jun 21 13:37:01: ISDN BR1/0 Q931: TX -> DISCONNECT pd = 8 callref = 0xBF
Cause i = 0x87AA - Switching equipment congestion
Jun 21 13:37:01: ISDN BR1/0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x3F
Cause i = 0x87E5 - Message not compatible with call state
Jun 21 13:37:01: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x8D calltype 2 HOST_DISCONNECT_ACK
Any idea ? I really don't know where to begin with.
06-27-2005 07:11 AM
Cause i = 0x80AA - Switching equipment congestion
The Cause ID means that the destination cannot be reached because the network switching equipment is temporarily overloaded.
You can check if the switching equipment is really overloaded by trying again.
Check with your local service provider.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide