09-23-2015 12:05 PM
I'm moving a 4.3 verison on an HP box to a BE6K version 10.
Is there a migration tool out there?
Solved! Go to Solution.
09-23-2015 12:20 PM
When you are coming from that far back a version it really doesn't make sense to have a tool. Cisco PCD will not support such an old version and besides dial plan practices and other best practice guidelines have changed since the 4.x days. Best to build the new cluster from scratch and use BAT and AXL tools or PRIME and build it as per current best practices. No point in bringing in data that could be stale or doesn't follow best practices.
09-23-2015 12:17 PM
I recommend you also post this to the Cisco Support Community for additional information and feedback. In addition, you may find the answer you are looking for there.
I hope this helps. Thank you for participating in the community.
Kelli Glass
Moderator for Cisco Customer Communities
09-23-2015 12:20 PM
When you are coming from that far back a version it really doesn't make sense to have a tool. Cisco PCD will not support such an old version and besides dial plan practices and other best practice guidelines have changed since the 4.x days. Best to build the new cluster from scratch and use BAT and AXL tools or PRIME and build it as per current best practices. No point in bringing in data that could be stale or doesn't follow best practices.
10-23-2015 03:34 PM
Hi,
There is a tool for going from 4x to 5x or 6x but at this point that does not make any sense, so I'd recommend you to use BAT to export as much as you can then modify as required and import on 10x.
HTH.
Regards,
Christian Nuche
Cisco TAC UC TL
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide