cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
296
Views
0
Helpful
1
Replies

Multi-site & gatekeepers

k.korlyakov
Level 1
Level 1

I have some problems with configuration:

Site A consist 2 CCM 3.07 working in cluster. Site B consist only 1 CCM 3.07. In the Site A I have 2 IOS gatekeepers (3660) with HSRP. I don`t want to do anonymous calls through gatekeeper, admission control only. Configuration of my gatekeeper is:

gatekeeper

zone local site_a.a.com a.com 10.250.0.13 - my HSRP address

zone local site_b.a.com a.com

no zone subnet site_a.a.com default enable - Cluster with 2 CCMs in Site A

zone subnet site_a.a.com 10.250.0.1/32 enable

zone subnet site_a.a.com 10.200.0.1/32 enable

no zone subnet site_b.a.com default enable

zone subnet site_b.a.com 10.51.0.1/32 enable - CCM in Site B

zone bw site_a.a.com 1024

zone bw site_b.a.com 1024

zone prefix site_a.a.com 30..

zone prefix site_b.a.com 530..

gw-type-prefix 1#* default-technology

no shutdown

I see 2 CCMs in "show gatekeeper endpoint" command output (Site A primary CCM & Site B CCM) with appropriate H.323 IDs.

What I must do on the CCMs to make a call from Site A to Site B ?

1 Reply 1

mmellet
Level 3
Level 3

After reviewing your configs they seem to look ok to me.