Receiving OLI and DNIS on AS5350

[siwat.thainugul]

I'm working a prepaid calling card application.

I just have a new T1 - PRI installed. In order to identify calls made from payphone, I need to receive extra 2 digits and add them to DNIS. This extra 2 digits is known as OLI, Origination Line Info.

So the DNIS that I'm looking for will look something like this:

DNIS = OLI (2 digits) + DNIS (10 digits)

i.e. if customers call toll free 8002223333 to use calling card from payphone, I want to receive DNIS as 708002223333.

1.) How do I configure AS5350 to get the above DNIS? Right now I only receive 800xxxxxxx for DNIS.

2.) How do I verify that the telco has passed me the OLI digits?

Thanks,

Siwat

[ebreniz]

You must configure the Cisco IOS gateway to support the switch variant from which the gateway receives ISDN switch.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00801541d2.html#wp1065067

[walleed222]

The old link is broken , can you please provide new link I have the same problem also