replace Cisco's logo on 7960

[joe.leo]

Hi,

1. Can I replace Cisco's logo with my Company's logo on the 7960, when it boots up.

2. also is it possible to show company name always on the screen.

Thanks

[rickb]

?!?!?! Sounds remarkably familiar.... If you really want to know see the link below.

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.ee75ff0

Rick

[joe.leo]

Ricky,

Thanks for your notice. But they don't post the example. Do you have it by any chance?

joe

[rickb]

Okay, the code isn't the important part, it is actually here:

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.ee75ff0/38

(minus the formatting error with the p and /p's, you don't need those)

That is the code for the idle url setting that is under each phone. The important piece is that Cisco uses the CIP graphic format for the logo image itself. If you can get your hands on the Cisco SDK, there is a file called gif2cip.exe that will convert your companies .gif file to the .xml file for you. Because of obvious licensing problems, I will not give out the file, but I would suggest you talk to your Cisco or Cisco S.E.

Rick