SNS question

[mohamed sebaey]

Hello experts

2- SNS question: if i need to upload file using SNS , the file will upload using (HD , medium quality , low quality) so i need to upload file in three formats to allow user can see in three formats??. Is there any method to upload the file on one format  and user can show the video in many formats???.

-

Thanks

[mohamed sebaey]

Very helpful , i need to share with you if i have a video camera which is connected to AS7710 then traffic go to MXE after that Wowza then end user , what is the delay between camera and enduser.

Thanks

[mohamed sebaey]

For DMP , i use DMP 4310 . I have two issues , i can not play my videos , other issue the presentation stop , i need to make it run everytime without any stop.

[jdedell12]

What video format are you using?  There is a good tool to verify video format called MediaInfo.  It is a free download and a very good way to see how the video was formated and is found at http://http://mediainfo.sourceforge.net/en.

When you say your presentation stops, what happens?  Is your presenation a playlist of multiple images?  If it is a playlist make sure you set a display time for each entry in the playlist.  If the playlist has images and video what is not playing?  If it is only one image set the play time on that image to 8 hours which resolves issues when there is only one image in a playlist.

[mohamed sebaey]

I use MP4 format  ,and it can not be displayed . playlist to run everytime  , the setting will be set on Appspacer or DMP or LCD and how?. Other question if i need to check that DMP can dispaly the video from Appspace , i go to devices and select one of my DMP - player preview or this is not correct. Your help highly apperciated for me. Note: I did not do any setting on DMP except (network configuration) , so if any required setting please tell me.

Thank you

[jdedell12]

There are multiple MP4 formats.  The DMP supports MP4 type 10 (H.264) with a TS wrapper as other MP4 formats are not supported.  The length of each item in a playlist is set when you create/modify the playlist so it is done in Appspace.  Using the Appspace preview helps in seeing how the images will be displayed but does not guarantee that they will work on the DMP.

Need to configure network, Appspace IP and NTP on DMP.  The rest of the defaults are normally what is needed.  I assume you are streaming the content to the DMP though you can also place the content on the DMP to be played locally.

[mohamed sebaey]

Hello

Many thanks for you , actually you are completely true . The problem from the format , but i donot have any program which can convert from format to other format . I need to convert from MP4 to MPEG2 , or MP4 (H.264).

Thanks

[jdedell12]

Take a look at VLC Media Player.  It has the ability to convert video files.  The MXE 3500 is the best solution to doing video conversions but this free player is available to do video conversions.

[Mike Assel]

Although I haven't tried it yet, I hear that Handbrake is a very good free transcoder as well.

Sent from Cisco Technical Support iPhone App

[mohamed sebaey]

Thanks so much , i use a free program from internet which convert my video to MPEG2 and it works so fine. Any way i have a strange problem ( the presentation works so fine , but suddenlly  the LCD is turn off for 15 min after that it works again) is this issue from ( Appspace or DMP or LCD?) ??.

Thanks

[islam.kamal · Accepted solution]

Hello

Did you have fix your problem?. I have same problem ,and i have already fixed this. 100% this problem related to your LCD.

So please check the setting for your screen. For example : disable the on the setting , the echo.

Thank you

please rate all useful answers.

[mohamed sebaey]

islam

yes , i solved my of my screens and as you said the problem was from my screens. We used Samsung LCDs , and Samsung technical support guide me to solve the problem. To modify some settings on the LCDs .

Thanks