02-18-2003 05:44 PM - edited 03-12-2019 10:44 PM
I have been reading Cisco Unity 4.0 System Requirements, and Supported Hardware and Software found at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_pre_installation_guide09186a0080117617.html so that I can design a Cisco TAC supported server do run Unity. In one part of the document it says that out-of-band management cards like the Hewlett-Packard Remote Insight Lights-Out Edition card are not supported but under that it tells me I can install Hewlett-Packard Insight Manager. Supported when used in conjunction with the Hewlett-Packard Remote Insight Lights-Out Edition card to remotely restart the Cisco Unity server. What is the best why do find out the right answer? Having an Out-Of-Band management card in the server is very important because the server is housed off site in an AT&T Data Canter.
02-19-2003 12:03 AM
The Hewlett-Packard Remote Insight Lights-Out Edition card is supported with Unity. Cisco IT uses it.
I don't see where it says that they are not supported in this doc.
========================================================
The following out-of-band management cards are supported for use with Cisco Unity 4.0(x):
-Dell Remote Assistant Card, version 2.0 and later.
-Hewlett-Packard Remote Insight Lights-Out Edition, all versions.
-IBM Remote Supervisor Adapter, all versions.
The following optional software has been qualified by Cisco for use with Cisco Unity 4.0(x):
-Adobe Acrobat Reader, version 4.0 or later.
-American Power Conversion (APC) PowerChute Plus for Windows 2000 and Windows NT, version 5.2.1 or later.
-Cisco IDS Host Sensor Agent, version 9/26/2001 or later.
-Dell OpenManage. Supported when used in conjunction with the Dell Remote Assistant Card to remotely restart the Cisco Unity server.
-Hewlett-Packard Insight Manager. Supported when used in conjunction with the Hewlett-Packard Remote Insight Lights-Out Edition card to remotely restart the Cisco Unity server.
-Hewlett-Packard OpenView. Supported for IP monitoring of Cisco Unity, SQL Server, and Exchange services, on all supported Cisco Unity hardware platforms.
-IBM Director. Supported when used in conjunction with the IBM Remote Supervisor Adapter to remotely restart the Cisco Unity server.
-NetIQ VoIP Manager version 2.0 for Cisco Unity. Install only the agent on the Cisco Unity server.
-RSA SecurID ACE/Agent for Microsoft Windows 2000, version 1.1.
========================================================
Please let me know if I am missing it.
Thanks,
Keith
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide