07-27-2023 11:08 PM
Hi everyone
Just have a quick question about configuring the DUal-Homed FEX with Nexus 93180, for every host which connects to the fex interfaces (like servers which have only one connection to n2k-2248) is there any ways to sync the running config between both parent nexuses or I have to config 103/1/1 on both Nexus switches.
Note:
fex 103 already registered on both parent switches
interface Ethernet1/49
switchport
switchport mode fex-fabric
fex associate 103
channel-group 103
no shutdown
interface port-channel103
switchport
switchport mode fex-fabric
fex associate 103
vpc 103
show vpc 103
vPC status
----------------------------------------------------------------------------
Id Port Status Consistency Reason Active vlans
-- ------------ ------ ----------- ------ ---------------
103 Po103 up success success -
here is my scenario
Solved! Go to Solution.
07-28-2023 01:14 AM - edited 07-28-2023 01:15 AM
Hello @John.Mayer,
You need to manually provide FEX port’s configuration consistency among vPC domain. You will need to configure the interfaces on both Nexus switches separately, including the port-channel and the associated interfaces.
07-28-2023 01:14 AM - edited 07-28-2023 01:15 AM
Hello @John.Mayer,
You need to manually provide FEX port’s configuration consistency among vPC domain. You will need to configure the interfaces on both Nexus switches separately, including the port-channel and the associated interfaces.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide