We have a couple of 6800IA devices connected to a 6880 switch. There will be several end hosts connected to the IAs and we need to configure private isolated ports for some of those hosts. A firewall pair is also connected to the 6880.
Our plan is to configure the 6880 ports to the firewall pair as pvlan promiscuous ports, and the 6800IA ports as pvlan isolated ports. When we do this, a host on one of the isolated ports can ping the a host on another isolated port. This is not supposed to happen in the pvlan world.
Here is the configuration:
vlan 300 name DMZ-Outside-Primary private-vlan primary private-vlan association 301 ! vlan 301 name DMZ-Outside-Isolated private-vlan isolated
interface TenGigabitEthernet1/5/1 description uplink to firewall A E0/8 switchport switchport private-vlan mapping 300 301 switchport mode private-vlan promiscuous end
interface TenGigabitEthernet2/5/1 description uplink to firewall B E0/8 switchport switchport private-vlan mapping 300 301 switchport mode private-vlan promiscuous end
Cisco® Nexus® Dashboard revolutionizes operations in today’s modern data-center environments. Join us to learn about the operational efficiencies realized from the seamless user experience of the dashboard and the powerful capabilities of Cisco Nexus Insi...
The HTML5 plug installation is successful. But I get the following error while I click on AVE. The other icons are showing up the results except AVE. Please let me know your SME thoughts on this error.
No VmmDomains Found
This session will help administrators and architects leverage SAN Insights Discovery to help understand the current status of their SAN fabric and help identify areas of opportunity for improvement. The attendees will learn the process, architecture, and ...