I need to bring up a Data center, this will be the Primary and the Other data center in NV will be the back. The NV data center us up. Basically i believe the Configs will be duplicated. I need somebody who can help me with this Turn up.
Hi,we have a Nexus 5010 with some SFP 1000BASE-T that we are unable to configure, when we try to set speed 1000 on the interface that contains the SFP we have the error message:"Configuration does not match the port capability"nexus1# sh int e1/20 ca...
I have two nx5500 switches with sid 10 (sw1) and 20 (sw2). they are connected by a single link (eth1/31). I have a vlan configured in fabricpath mode with an access port on each of the switches.I am trying to understand how fabricpath routing works h...
Im getting this error when I try to run Epld updates.Could not extract EPLD images, Insufficient space in bootflash.Failed to extract EPLD image file, Exiting.. I have allready delete some of the NXos bin files I downloaded. I'm currenty running 6.1 ...
Hi Guys, Is it possible to run a ospf or any other routing protocol between two 7Ks and a catalyst switch, they are connected in a triangle shape topology, please see the attached diagram, if answer is yes, please give me some explanation, if NO why ...
I am currently deploying Nexus 5500 with Fabric path & deploying FEX as well. If you look at the FEX data sheet they talked about 4 different topology.I have 2 question.Please see link below:http://www.cisco.com/c/en/us/products/collateral/switches/n...
I have a Cisco ACE 4710. Does this device have the ability to do rate limiting/traffic shaping on a per-session basis? For example, if I'm load balancing 2 real servers, can I tell the ACE to limit each session to "XX" amount of bandwidth?
I'd be interested in hearing if you have connected an F5 load balancer cluster to an N5500 pair. Are there any caveats or lessons learned you could share? Any odd behavior?BTW, we are using v6.0.2 and we have an l3 card.I'd appreciate any insights....
Hi all,I've read lots of Cisco docs/white papers on DCI - Layer 2 extension between DCs, but as yet I cannot find any decent information on how best to deploy firewalls and load balancers in such a design. I've seen refs to FHRP isolation on Nexus 7k...
HII need to do the following scenario. I want to know that weather CISCO ACE is capable of doing it or not.we have a special problem that we want to load balance the traffic over one server but on different TCP ports.for example the traffic going to ...
Hi there,I have a situation that I am trying to solve. We have lot of services trough ACE, but now I have to modify one of them, PROXY servers. I have six (6) servers working with Sticky, but with a MASK 255.255.255.0, which produce an unbalanced sit...
I have a private network running protected along with the regular corporate network environment. This protected network now is required at another campus location, Data Centre 1( I am at Dta Centre 2). A virtual server needs access to the private net...
Hi all, i'm wondering if you can help me, i'm trying to deploy Cisco Prime Infrastructure in a lab envrionment but it's not working correctly.I've deployed "PI-VA-2.1.0.0.87-Express.ova" to a VMware ESXI 5.1U2 hypervisor with 2x AMD 8128HE CPUs, 96GB...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: