08-31-2017 06:19 AM - edited 03-01-2019 08:37 AM
Hopefully an easy question. I am trying to determine whether the 100G interfaces on a Nexus 93180YC-EX can be channeled. The only documentation I have been able to find on this states the following:
***
Port-channels are supported on devices with generation 2 (and later) 100G interfaces. (7.0(3)I3(1) and later)
***
Are the 100G interfaces on this switch generation 1 or 2 and can they be channeled?
Switches we have are running 7.0(3)I5(2).
Thanks,
Solved! Go to Solution.
09-01-2017 12:17 AM
Hello,
This 'generation' thing is not mentioned explicitly in our docs, however if you check page 25 of the following link it shows the first and second generation modules ( QSPF28 comes under 2nd genration )
The Nexus 9K datasheet shows that6p 40G/100G QSFP28 is used with N9K-C93180YC-EX, so it should be good
Manish
- Do rate useful posts -
09-01-2017 12:17 AM
Hello,
This 'generation' thing is not mentioned explicitly in our docs, however if you check page 25 of the following link it shows the first and second generation modules ( QSPF28 comes under 2nd genration )
The Nexus 9K datasheet shows that6p 40G/100G QSFP28 is used with N9K-C93180YC-EX, so it should be good
Manish
- Do rate useful posts -
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide