Nexus 93180YC-EX 100G interfaces

[g.hammond]

Hopefully an easy question. I am trying to determine whether the 100G interfaces on a Nexus 93180YC-EX can be channeled. The only documentation I have been able to find on this states the following:

***

Port-channels are supported on devices with generation 2 (and later) 100G interfaces. (7.0(3)I3(1) and later)

***

Are the 100G interfaces on this switch generation 1 or 2 and can they be channeled?

Switches we have are running 7.0(3)I5(2).

Thanks,

[Manish Gogna · Accepted solution]

Hello,

This 'generation' thing is not mentioned explicitly in our docs, however if you check page 25 of the following link it shows the first and second generation modules ( QSPF28 comes under 2nd genration )

https://www.nanog.org/sites/default/files/meetings/NANOG64/1004/20150604_Hankins_Evolution_Of_Ethernet_v1.pdf

The Nexus 9K datasheet shows that6p 40G/100G QSFP28 is used with N9K-C93180YC-EX, so it should be good

https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/datasheet-c78-736651.html

Manish

- Do rate useful posts -