cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1167
Views
0
Helpful
4
Replies

NX 2224 Etherchannel issues - 2224 limits - Bug or myself

jerome.gomez
Level 1
Level 1

Hi all,

does anybody know if there is a kind of limitation to deploy Etherchannel on 2224 FEX (VPC or Not, Mode on or LACP)

In fact i tried to setup a channel on a 2224 and ports came in err disable mode with a reason set to null

When i apply the same config to a 2248 (same fex N°, same ports, same devices at the other end), it works perfectely

thanks for your help

regards

1 Accepted Solution

Accepted Solutions

mbinzer
Cisco Employee
Cisco Employee

Hi,

i just looked and there is a known defect:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtl68802

please check if that applies to your scenario aswell.

thanks...

Matthias

View solution in original post

4 Replies 4

mbinzer
Cisco Employee
Cisco Employee

Hi,

i just looked and there is a known defect:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtl68802

please check if that applies to your scenario aswell.

thanks...

Matthias

Hi,

it looks like yes. Error message is the same and I'm in impacted releases. I'll try to upgrade on monday and let you know what's the status.

Thanks for your help

Hi,

thanks Matthias you were right. After upgrade plroblem is solved.

kind regards

Hi,

thanks for letting us know. :-)

Matthias

Review Cisco Networking for a $25 gift card