1721 ADSL Routing

[johnnycisc0]

Hi all,

Looking for help in configuring cisco 1721-adsl(wic).

I want to configure the port ATM0 so that it connects to standard ADSL telephone line. Would appreciate a list of commands for this, or any websites with info.

ps pc's will onnect to this router thru wic 4esw card and they to will need to access adsl. These pc's will also have to pick up dhcp from existing server.

[a.awan]

Try the ADSL WIC section of the following article list. I am sure you will find the DSL configuration part relevant to your setup in one of the listed sample configurations:

http://www.cisco.com/pcgi-bin/Support/browse/psp_view.pl?p=Technologies:PPPoE__PPPoA__PPP_over_Ethernet__PPP_over_ATM&viewall=true

Configuring the WIC-4ESW is relatively straight forward if you plan to have all ports on the same VLAN. Depending on where the DHCP server is physically located you might have to configure ip helper-address on the VLAN interface corresponding to the WIC-4ESW ports. If you need further configuration details do explain your setup providing specific details.