1760 Hangs on Boot

[bigassmonkey]

Consol in durring boot sequence and it only gets this far.

Self decompressing the image : #################################################

############################################################ [OK]

Smart Init is enabled

smart init is sizing iomem

ID MEMORY_REQ TYPE

MainBoard 0X00027A80 1760

0X000F3BB0 public buffer pools

0X00211000 public particle pools

0X002E 0X0001B800 Card in slot 0

TOTAL: 0X00347E30

If any of the above Memory Requirements are

"UNKNOWN", you may be using an unsupported

configuration or there is a software problem and

system operation may be compromised.

Allocating additional 655793 bytes to IO Memory.

PMem allocated: 29458463 bytes; IOMem allocated: 4095969 bytes

program load complete, entry point: 0x80008000, size: 0x67064c

any ideas? Thanks

James

[bigassmonkey]

also Ctrl + Break is not letting me in I have hit it within 10 seconds of beginning of boot

James

[dan.gregoire]

James,

I wanted to verify what IOS version and feature set you were running and how much DRAM memory you have? Does the 1760 boot without any modules installed?

[bigassmonkey]

no it will not boot with out WICs....

it has 16/32 on memory and I am running a single ADSL wic and

C1700-y7-mz.123-9.bin is the IOS version

[olorunloba]

That IOS requires 48MB of Dram and 16MB of flash. Confirm you have up to this,