About dan.gregoire

dan.gregoire · 01-06-2006

Mike,One other possible option that you could keep in mind is called the Fast Software Upgrade (FSU)method. This method still has some down (1-2 minutes for us)time but is much less than reloading the switch (7-8 minutes for us). Here is a link that ...

dan.gregoire · 08-05-2005

I found out some more information on the set port description from one of our switches running 8.4(3). You can see the output from "show port description". Just from what I can see the set name has a limitation of 21 characters, port description has ...

dan.gregoire · 08-04-2005

All the documentation that I've seen state the WS-X6608T1 is only supported on CatOS and not on IOS. Here is a link that shows this:http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper09186a00800c8441.shtmlThe HW/SW compatibilit...

dan.gregoire · 02-09-2005

I'm sorry, I forgot the link.http://www.cisco.com/en/US/products/hw/switches/ps708/products_release_and_installation_notes09186a008026a74b.html#wp3844Also you still do require the squeeze command with the sup-bootlfash:, like you said.

dan.gregoire · 02-09-2005

Glen,You are correct, there is no need for the squeeze command with the ATA flash disks. As soon as you delete the file the space is recovered. Here is a link that talks about the ATA flash and the squeeze command being N/A. I hope this answers your ...

Member Since	‎03-15-2004 12:37 PM
Date Last Visited	‎12-27-2023 09:08 AM
Posts	20
Total Helpful Votes Received	13

User Statistics

User Activity

Re: Upgrading IOS without down time

Re: 'set port description' command in CatOS 8.4

Re: callmanager module ws-x6608

Re: Sup 720 squeeze function

Re: Sup 720 squeeze function