Re: 1A-OC3 on VIP4-50

jackgaoyang · ‎11-03-2004

the PA is good on 7206VXR, but crash VIP4-50:

marikakis · ‎11-04-2004

Have you tried to reseat the VIP ?

Is there any other PA ( besides the PA-OC3-SMI )

inserted in the other slot of the same VIP ?

M.

jackgaoyang · ‎11-04-2004

same result in either slot

the vip4-50 can be used with other pa, such as 4E1G:

Router#show diag 0

Slot 0:

Physical slot 0, ~physical slot 0xF, logical slot 0, CBus 0

Microcode Status 0x4

Master Enable, LED, WCS Loaded

Board is analyzed

Pending I/O Status: None

EEPROM format version 1

VIP4-80 RM7000 controller, HW rev 2.03, board revision B0

Serial number: 31451370 Part number: 73-8676-01

Test history: 0x00 RMA number: 00-00-00

Flags: cisco 7000 board; 7500 compatible

EEPROM contents (hex):

0x20: 01 22 02 03 01 DF E8 EA 49 21 E4 01 00 00 00 00

0x30: 58 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Slot database information:

Flags: 0x4Insertion time: 0x71B84 (00:00:52 ago)

Controller Memory Size: 128 MBytes CPU SDRAM, 64 MBytes Packet SDRAM

PA Bay 1 Information:

G703 Serial PA, 4 ports

--More-- EEPROM format version 1

HW rev 1.01, Board revision D0

Serial number: 29764178 Part number: 73-2250-04

2 crashes since restart.

Last crash context (*Apr 06 1998 16:11:30):

Nevada Error Interrupt Register = 0x2

PMA error interrupt

PMA Error Register = 0000000000000000

PCI master address = 0000000

$0 : 00000000, AT : 00000000, v0 : 00000000, v1 : 00000000

a0 : 00000000, a1 : 00000000, a2 : 00000000, a3 : 00000000

t0 : 00000000, t1 : 00000000, t2 : 00000000, t3 : 00000000

t4 : 00000000, t5 : 00000000, t6 : 00000000, t7 : 00000000

s0 : 00000000, s1 : 00000000, s2 : 00000000, s3 : 00000000

s4 : 00000000, s5 : 00000000, s6 : 00000000, s7 : 00000000

t8 : 00000000, t9 : 00000000, k0 : 00000000, k1 : 00000000

gp : 00000000, sp : 00000000, s8 : 00000000, ra : 00000000

EPC : 00000000, ErrorEPC : 00000000, SREG : 00000000

MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000000

Cause 00000000 (Code 0x0): Interrupt exception

--Boot log begin--

Cisco Internetwork Operating System Software

IOS (tm) VIP Software (SVIP-DW-M), Version 12.2(15)T12, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Thu 25-Mar-04 07:07 by cmong

Image text-base: 0x60010944, data-base: 0x60500000

--Boot log end--

--More--

Router#

marikakis · ‎11-05-2004

In the previous output you had attached, in slot 0 you had a VIP4-50,

the memory size in slot 0 was unknown, and the PA was not recognized by the router.

In the last output you provided, in slot 0 you have a VIP4-80 (not a VIP4-50),

the memory size of the card is known, and the PA is recognized by the router.

Is this a production router or a lab router?

Can you do some tests ?

M.