2600 and 837 VPN over ADSL with internet access

[gregsreed]

I am currently trying to install a cisco 837 to enable us to have internet access locally and also use the router as backup for our framestream network with VPN over ADSL and HSRP. So far i have connectd the router the internet and that works fine from the router but i am unable to access the internet from the other router or any PC's. Please could someone look at the enclosed sh run's and tell me what is wrong.

Thanks

[dbellazetin]

First on the 837 I would remove the "ip inspect" command from the Ethernet 0 interface you only need this on the internet interface. This could fix your problem, but if it does not I would verify NAT.

I would do an extended ping from the 837 to the internet and see if you get replies. If not then your NAT may be failing.

Daniel

[gregsreed]

Daniel,

Thank you for your help i removed the ip inspect and i made no difference so i then changed the nat to use the dialer 1 interface for nat and it now works fine.

Thanks

Greg