hello,
i used this configuration but i want open the vp with VPI=30.
In the consol and in the interface ATM 1. i cannot open the vpi = 30 but i can vpi =0-0 ?
is it possible to do it?
version :
ATM#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2900 Software (C2900-M-MX), Version 12.0(7)XF, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC:Home:SW:IOS:Specials for info
Synced from 12.0(6.5)T4
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 25-Nov-99 23:59 by srsastry
Image text-base: 0x00003000, data-base: 0x00275478
ROM: Bootstrap program is C2900ATM (Pebble) boot loader
ATM uptime is 3 hours, 46 minutes
System returned to ROM by power-on
Running default software
Cisco WS-X2971-XL (PPC403GCX) processor (revision 0) with 8192K/4096K bytes of memory.
1 ATM network interface(s)
64K bytes of non-volatile configuration memory.
Motherboard assembly number: 73-2438-09
Motherboard serial number: FAB062451E8
Model revision number: 01
Motherboard revision number: D0
Model number: WS-X2961-XL
Configuration register is 0xF
configuration :
Current configuration:
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption max-servers 0 max-servers 0
!
hostname ATM
!
process-max-time 198
!
interface ATM1
atm pvc 1 0 100 aal5snap 1000 1000 32
atm pvc 2 0 101 aal5snap 1000 1000 32
atm pvc 3 0 102 aal5snap 1000 1000 32
atm pvc 4 0 5 qsaal
atm pvc 5 0 16 ilmi
atm multipoint-signalling
atm bind pvc vlan 1 100
atm bind pvc vlan 2 101
atm bind pvc vlan 3 102
no atm ilmi-keepalive
!
interface ATM1.1 point-to-point
!
interface ATM1.100 multipoint
!
!
line con 0
transport input none
stopbits 1
line aux 0 7
!
end
best regards
