04-21-2005 04:10 AM - edited 03-02-2019 10:32 PM
Hi,
i have a number of 3560 switches, powered and non powered, which i want to stack with the cab-sfp-50cm cables. IOS is 12.2.20SE4.
However, i get this error:-
%PM-4-ERR_DISABLE: gbic-invalid error detected on Gi0/2, putting Gi0/2 in err-disable state
I have tried shut/no shut, auto-neg trunking, static trunking, and a comprehensive search and can find no incompatibility problems posted anywhere.
Do i need a later ios release ? These switches are new out of the box today !
Am i missing some fundamental piece of configuration ?
Craig
04-21-2005 04:59 AM
The CAB-SFP-50CM is first supported with 12.2(25)SEA software. Try upgrading to 12.2(25)SEB which is on CCO.
04-21-2005 05:35 AM
Ok, many thanks for the info.
Unfortunately i dont have access to CCO, so will be on to my supplier.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide