06-20-2003 06:26 AM - edited 03-02-2019 08:18 AM
Greetings,
I am getting following errors on my 3640 routers. I don't know what it means?
GMT: %AMDP2-FE-6-EXESSCOLL:Ethernet0/0 TDR0 TRC=0
I am getting some input and output errors on e0/0 interface.
Solved! Go to Solution.
06-20-2003 07:29 AM
half duplex ethernet gets collisions as a part of how it works; csma/CD. When there are a lot of collisions it affects performance. This message is telling you that the router is seeing an excessive number of collisions on that interface.
It can be caused by valid increased load. It usually happens at some bottleneck in the net. It can also happen when a host screws up and causes a data storm (unicast) or broadcast storm. You need to profile the data on the link using a sniffer or some such tool.
06-20-2003 07:29 AM
half duplex ethernet gets collisions as a part of how it works; csma/CD. When there are a lot of collisions it affects performance. This message is telling you that the router is seeing an excessive number of collisions on that interface.
It can be caused by valid increased load. It usually happens at some bottleneck in the net. It can also happen when a host screws up and causes a data storm (unicast) or broadcast storm. You need to profile the data on the link using a sniffer or some such tool.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide