06-15-2005 11:26 AM - edited 03-02-2019 11:06 PM
I have a Catalyst 3750G-24TS-24 switched with the enhanced image.
One of the optical interfaces is connected to an uplink OC12 Mux. I would like to run 3 of its copper Gigabit interfaces at 200Mbps each.
Is this possible? example, ideas, urls etc are welcome.
dayo
06-16-2005 07:03 AM
Hello Dayo,
you could configure unicast storm-control on your ports:
interface GigabitEthernet0/1
storm-control unicast level 20.00
This would limit the port to 20% of 1 Gigabit, which effectively means 200Mbit.
HTH,
GP
06-17-2005 05:18 AM
going thru the command reference - I found 3 commands that could be used:
mls qos
srr-queue
storm-control
Which of these 3 commands is the best choice in a high traffic environment. i.e. which is less CPU intensive and doesn't cause too much harm to the underlying applications.
dayo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide