02-19-2003 10:24 PM - edited 03-02-2019 05:13 AM
Dear Sirs:
Two Catalyst6509 with SupervisiosII and MSFC2 in a campus network ,the two switch are in the core layer of the network,and the HSRP is working. I don't know if the MLS configuration is correctly configured. Followed the configuration of the two MSFCs.
Thanks.
1 MSFC1
mls rp nde-address 10.97.1.1
mls rp ip
no mls ip multicast aggregate
!
!
!
interface Vlan1
ip address 10.97.1.2 255.255.255.0
no ip redirects
mls rp vtp-domain tctnet
mls rp management-interface
mls rp ip
standby 1 ip 10.97.1.1
standby 1 priority 105
standby 1 preempt
!
interface Vlan2
ip address 10.97.2.2 255.255.255.0
no ip redirects
mls rp vtp-domain tctnet
mls rp ip
standby 2 ip 10.97.2.1
standby 2 priority 55
standby 2 preempt
2 MSFC2
mls rp nde-address 10.97.1.1
mls rp ip
no mls ip multicast aggregate
!
!
!
interface Vlan1
ip address 10.97.1.3 255.255.255.0
no ip redirects
mls rp vtp-domain tctnet
mls rp management-interface
mls rp ip
standby 1 ip 10.97.1.1
standby 1 priority 55
standby 1 preempt
!
interface Vlan2
ip address 10.97.2.3 255.255.255.0
no ip redirects
mls rp vtp-domain tctnet
mls rp ip
standby 2 ip 10.97.2.1
standby 2 priority 105
standby 2 preemp
02-20-2003 06:02 AM
CAT6500 with Sup2/MSFC2 uses CEF based MLS for IP. It is enabled by default and cannot be disabled. You do not need the above MLS configs unless you have a CAT5500 with a NFFC and you want the MSFC to be the RP for it
02-22-2003 06:52 PM
Pull out the MLS statements in your configs and you have almost identical configs to our 6513 HSRP configs.
We use two HSRP fiber GigE uplinks from each floor chassis to a pair of redundant Distribution chassis in our core. Just as you appear to be doing, we balance the load in our network by making the Primary HSRP for odd numbered floors to Distribution Switch 1 and Primary HSRP link for even florrs to Distribution Switch 2. Works great. We have the IP fail-over times down to a couple seconds - clients don't even notice.
Some would say the PREEMPT command is not needed on the the second HSRP link as there is nothing which could preempt it but it is probably better for the sake of consistency to always include it everywhere.
Cheers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide