02-28-2018 05:51 PM - edited 03-03-2019 08:45 AM
Hi,
I have WS-X45-SUP8L-E running on cat4500es8-universalk9.SPA.03.08.04.E.152-4.E4.bin.The switch is not supporting radius-server host command but i already configured dot1x and aaa. See details below.
#sh run | i dot1x
aaa authentication dot1x default group radius
dot1x system-auth-control
dot1x guest-vlan supplicant
#sh run | i group radius
aaa authentication dot1x default group radius
aaa authorization network default group radius
(config)#radius-server host?
% Unrecognized command
Is there a new way to configure the radius-server host for 802.1x on 03.08.04.E?
Thanks,
Gab
Solved! Go to Solution.
03-04-2018 10:00 AM - edited 03-04-2018 10:13 AM
There is a new set of commands for RADIUS and TACACS+:
radius server <name>
address ipv4 <ip_address>
key <password>
!
tacacs server <name>
address ipv4 <ip_address>
key <password>
03-01-2018 06:22 PM
Hi
Take a look on this doc:
https://communities.cisco.com/docs/DOC-68171
03-04-2018 10:00 AM - edited 03-04-2018 10:13 AM
There is a new set of commands for RADIUS and TACACS+:
radius server <name>
address ipv4 <ip_address>
key <password>
!
tacacs server <name>
address ipv4 <ip_address>
key <password>
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide