Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have WS-X45-SUP8L-E running on cat4500es8-universalk9.SPA.03.08.04.E.152-4.E4.bin.The switch is not supporting radius-server host command but i already configured dot1x and aaa. See details below.
#sh run | i dot1xaaa authentication dot1x ...
Hi Guys, I would like to ask how could I define a PBR if the VLAN is behind ASA? There is no SVI set in 6509. I can't set ip policy route-map command on Gig2/6. 6509:ip access-list extended ACL-ATT-TO-RIVERBED permit ip 10.199.24.0 0.0.0.255 10.226.1...
Hi All,I would like to ask if any one of you have encountered this kind of issue. I have a 4506 with WS-X4248-RJ45V modules. Random ports in Slot 2, 5 and 6 can't supply POE. The steps I have done is connect my laptop and the port goes up but it's do...
Hi Guys, I would like to ask if you have encountered this kind of problem. I have a WS-C3750-48P, all ports were supplying power to ip phones then suddenly only 15 ports can generate POE. Please see details below. show power inline | exclude offModu...
