09-18-2018 06:19 AM - edited 03-03-2019 08:54 AM
I have issues upgrading this router due to "not enough space" problems
I was unable to upgrade the running-config tftp
(copy tftp://ip address/c800-universalk9-mz.SPA.157-3.M1.bin run)
so I uploaded the config to Flash (copy tftp://ip address/c800-universalk9-mz.SPA.157-3.M1.bin flash)
I then deleted the old config and attempted to ensure the router would boot from the new config only.
even though the new config now shows correctly in Flash and in Rommon the router still will only boot into Rommon what am I missing here? do I really have to upgrade the memory?
Solved! Go to Solution.
09-18-2018 08:29 AM - edited 09-18-2018 08:30 AM
You need to change the config register:
! config-register 0x2102 !
...should do the trick.
cheers,
Seb.
09-18-2018 06:26 AM
I'm a little confused. The output from the second command indicates that you have successfuly booted and are in EXEC.
When you have the SIDCIS91FVOIP1# prompt, what is the output of sh ver?
cheers,
Seb.
09-18-2018 08:18 AM
I am able to boot into the IOS but only manually from ROMMON the device will not power up into ios automatically. is it something to do with this bootstrap which is still showing the old version how do I change that?
09-18-2018 08:29 AM - edited 09-18-2018 08:30 AM
You need to change the config register:
! config-register 0x2102 !
...should do the trick.
cheers,
Seb.
09-18-2018 09:15 AM
do you know what!!! I've looked and changed that several times and now realise the typo in 0x2100
THANK YOU so much!! i'm off to specsavers :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide