01-13-2003 07:19 AM - edited 03-02-2019 04:08 AM
Hello.
Yesterday, i was uploading a new IOS version in my router 2610 (3DES version) and then, when i finished it, i was reseted the machine and i received the message:
"*** Program Exception ***
PC = 0x80008d58, Vector = 0x700, SP = 0x8000613c
monitor: command "boot" aborted due to exception"
After that, the router started in ROM status and i don´t know what can i do.
Anybody can help me? Why can´t this router start?
(NOTE: Before the uploading, i extended the RAM memory (48MB).
01-13-2003 07:48 AM
Please provide the name of the file you loaded in the router.
01-13-2003 08:01 AM
the file name is c2600-ik9o3s-mz.122-8.T8.bin
01-13-2003 11:15 AM
The filename will be: c2600-ik8o3s-mz.122-8.T8.bin.
Feature set IP/FW/IDS PLUS IPSEC 56.
Memory requirements are 16Flash, 64Mb RAM.
You may not require the firewall in which case you can revert to:
c2600-ik8s-mz.122-8.T8.bin
IP PLUS IPSEC 56
For this image 16/64 is also required but there is more chance that it will run with only 48Mb of RAM.
Goodluck.
01-13-2003 09:24 AM
You may need 64 MB of RAM for this image
01-13-2003 11:13 AM
I´ve probed with 64MB RAM and the error is the same.
¿¿¿???
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide